Int. J. Advanced Structures & Geotechnical Engineering
ISSN 2319-5347, ISI Impact Factor: 0.763
VOLUME 02 NO. 03 JULY 2013:
Title: Combined
effect of Bentonite and Silica Fume properties of High
Performance Concrete
Authors: Junaid Akbar, Bashir
Alam, Muhammad Ashraf
Abstract:Two very basic possessions of
concrete are being addressed by this research work i.e.
Durability and Compressive Strength of concrete. The
major variable that is introduced in the research work
is Bentonite plus Silica Fume (CBS) together, as partial
replacements by weight of cement. The experimental
program explained by this explosion contains two parts.
The first part was to investigate the potential use of
Bentonite plus Silica Fume (CBS) to evaluate its effect
on Compressive strength of High Performance Concrete
(HPC). An HPC batch, properly mix designed was prepared,
aiming at strength of 6000psi. Super plasticizer was
also introduced to attain high workability. Some part of
the batch was treated for a Compressive Strength test.
The second part of research work addresses its effect on
Durability of concrete. For this purpose the rest of the
batch was exposed to a cycle of wetting and drying in
sulfate rich atmosphere, the solution containing 50 g/l
of Na2SO4.The durability was measured in terms of
resistance offered to the penetration of sulfate ions
into the concrete. Ultrasonic Pulse Velocity testing was
performed for this purpose and the quality of concrete
was checked. It was seen from the results that BS
samples resulted in fairly good early and later stage
Compressive strength when compared with Control samples.
On the other hand it showed very good resistance to
sulfate attack. Control samples which were exposed to
sulfate environment were affected very harshly.
Keywords: UPV Testing, UTM Testing,
Sulfate Attack.
pages: 101-105